Mount / Unmount Hard Disk; Change User Name And Password - Avtech 36CH XVR Series User Manual

DDNS
SYSTEM NAME
HOST NAME
E-MAIL
CURRENT HOST ADDRESS
MAC000E533A3D4A.ddns.eagleeyes.tw
SKIP
Enable DDNS if needed.
Note: To enable the DDNS later, please go to MENU  NETWORK  DDNS.

3.2 Mount / Unmount Hard Disk

When this device is powered on and hard disks are inserted, you'll see the hard disk indicators are flashing in red,
indicating the hard disks are now detected by this recorder. The indicators will then turn to steadily green,
indicating the hard disks are mounted and ready to use.
Right click the mouse to exit from the full screen mode. Click MENU → STORAGE to see the status of each
connected hard disk and make sure each hard disk is detected with the status of READY.
To unmount the hard disk, click
HDD NEARLY FULL (GB)
HDD OVERHEAT ALERT (°C)
OVERWRITE
KEEP DATA LIMIT(DAYS)
TEMPERATURE TO ENABLE FAN
ID
HDD 5-1 NORMAL
HDD 5-2 NORMAL

3.3 Change User Name and Password

It's highly recommended to change the user name and password of this device to keep your account safe.
Otherwise, any person could access this device if he knows the default user name and password.
If you didn't go through the setting wizard at the first place, you'll be prompted to change the user name and
password:
WARNING
PLEASE BE ADVISED TO MODIFY THE DEFAULT
ACCOUNT TO ENSURE YOUR INFORMATION SECUIRTY.
 MODIFY
O REMIND ME LATER
O DON'T REMIND ME ANYMORE
CONFIRM
Choose MODIFY to start the change immediately.
SETUP WIZARD
to unmount, and the status will turn from READY to INACTIVE.
TYPE STATUS SIZE TEMP.
INACTIVE 750GB
READY 1.00TB
ON
Eagleeyes

MAC000E533A3D
PREV NEXT
STORAGE
SERIAL NUMBER
-- WD-WCAV53797317
-- WD-WMC1U5344933
5
70
ON
OFF
30
FREE SIZE FORMAT TIME
269.856GB 2017/07/18 23:03:52
9.88GB 2017/07/18 23:10:55
FOR INITIAL USE
HEALTH STATUS
GOOD
GOOD
8