Upgrade - Avtech 36CH XVR Series User Manual

6.12.2 UPGRADE

In this menu, you can choose to upgrade your recorder (LOCAL) or the connected our brand's IP cameras
(CAMERA).
LOCAL
Save the upgrade files obtained from your installer or distributor in a compatible USB flash drive, and insert it
into the USB port. Then, click SUBMIT to start upgrading.
Note: Before using the USB flash drive, please use your PC to format the USB flash drive to FAT32
format first. For the list of compatible USB flash drives, please refer to "APPENDIX 3 COMPATIBLE
USB FLASH DRIVE LIST at page 58.
LOCAL CAMERA
UPGRADE
VERSION
CAMERA
You can choose to upgrade several connected IP cameras from the recorder as long as the cameras are our
brand's IP cameras.
LOCAL CAMERA
CHANNEL VERSION
CH1 1085-1032-1046-1020-A1A1
CH2 1020S-1007S-1011S-1009S
CH3
CH4
Step1: Save the upgrade files obtained from your installer or distributor in a compatible USB flash drive, and
insert it into the USB port.
Step2: Choose to browse to where the firmware file is saved and choose the file to upgrade. Then, choose
SELECT to confirm and return to the upgrade page.
/
NAME
FullImg-1086-1033-1046-1020.bin
FullImg-1022-1007-1011-1009.bin
Step3: Repeat Step2 as many as needed until all cameras which need firmware upgrade are selected.
If one firmware file applies to several IP cameras, select COPY TO to apply the same file to the
applicable cameras.
Step4: Choose UPGRADE to start upgrading all selected cameras, or choose
one.
UPGRADE
SUBMIT
1002-1001-1001-1000
UPGRADE
DIRECTORY
/mnt/usb/FullImg-1086-1033-1046-1020.bin
SIZE TYPE
27.6MB regular file
9.6MB regular file
STATUS
UPGRADE COPY TO
USB DEVICE
MODIFIED DATE
2017-07-13 12:19:32
2017-08-16 17:05:16
CANCEL
to upgrade the camera one by
MAIN MENU
SELECT
47