Avtech 36CH XVR Series User Manual page 48

6) LANGUAGE
Select the language of the OSD.
7) HDMI2 DISPLAY
Specify how the second HDMI port is used for video output: CALL MONITOR / EVENT MONITOR /
LIVE / MAIN MONITOR.
CALL MONITOR is used for sequence display. When this option is selected, go to CALL SCREEN

DURATION to select the duration time in second (03 / 05 / 10 / 15) and CALL MONITOR
PERMIT to choose the channel(s) you want for sequence display.
FUNCTION
CALL SCREEN DURATION
CALL MONITOR PERMIT
EVENT MONITOR is used when any alarm event occurs. When this option is selected, go to

LAYOUT to select how many channels you want to see, and PRE-ALARM (SEC) and
POST-ALARM (SEC) to set how many seconds you'd like to see before (0 ~ 5) and after (3 ~ 10)
the event starts.
FUNCTION
LAYOUT
PRE-ALARM (SEC)
POST-ALARM (SEC)
LIVE is used to select how many channels you'd like to show on the spot monitor.

FUNCTION
LAYOUT
CH1
CH5
HDMI2 DISPLAY
CALL MONITOR
5
4 selected
HDMI2 DISPLAY
EVENT MONITOR
4
3
5
HDMI2 DISPLAY
LIVE
4
CH3

CH8



MAIN MENU
43