System Logout; Hardware Reset; Ptz Control - Avtech 36CH XVR Series User Manual

5.3 System Logout

When different user accounts are created for system management, make sure you log out after your access in
case other people access the system with your account.
Choose MENU → POWER CONTROL, and choose
Note: The default user name and password are both admin, which is the highest user level.

5.4 Hardware Reset

This is used when you lose the access user name and / or password. This will reset your recorder to its factory
default values.
Step 1: Power off your recorder.
Step 2: Find a pinhole on the rear panel of your recorder, next to the USB 3.0 port.
Step 3: Use a thin sturdy object, such as a straightened paperclip, and push it through the hole to press the
reset button. Press and hold the button, and power on your recorder at the same time. Release the
button when you hear the second beep sound. You'll see the reset message on the screen.

5.5 PTZ Control

Enter
Up / Down / Left / Right
/ / /
PAN / TILT
to log out the system.
Click to confirm your selection / enter the menu.
Click the arrow keys ( /  /  / ) to more the camera lens up / down / left /right.
Click and drag the slider to move the camera lens vertically or horizontally.
FREQUENTLY-USED FUNCTIONS
17