Table of Contents
Advertisement
5) AREA
Click EDIT to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note: To exit area setting and return to the detection page, right click your mouse.
6) ADVANCED CONFIG
The advanced settings are available only when the connected camera supports.
Privacy mask
You can cover certain areas on the camera image with privacy masks. Up to 20 areas could be added.
MOSAIC SIZE
NAME
FUNCTION
MASK1
MASK2
Select ADD to add a new setting, EDIT to modify an existing setting, and DEL to remove a setting.
NAME
FUNCTION
MOSAIC
COLOR
MOSAIC COLOR
TRANSPARENCY
MASK AREA
Item
MOSAIC SIZE
NAME
FUNCTION
MOSAIC
COLOR
MOSAIC COLOR
TRANSPARENCY
MASK AREA
ROI (Region of Interest)
ROI is used to reinforce the image quality of the selected area(s). Users could specify two areas in the camera view.
REGION
1
2
PRIVACY MASK
MOSAIC
COLOR
OFF
OFF
ON
ON
ON
ON
PRIVACY MASK - EDIT
Description
Choose the mosaic size of the privacy mask. The options are: 8×8, 32×32, and 64×64.
Name your privacy mask.
Select "On" to enable the privacy mask function.
Select "ON" to have the mosaic effect.
Select "ON" to color the privacy mask. In the meantime, you can't see the mosaic effect.
Select the color for the privacy mask.
Select the transparency for your privacy mask. The options are: 0%, 25%, 50%, and 100%.
Select "SETUP" to enter the area selection page. To exit, right click.
REGION OF INTEREST
ENABLE
ON
OFF
MOSAIC COLOR
ADD
MASK3
ON
ON
ON
50%
SETUP
QUALITY
7
7
EDIT
8x8
TRANSPARENCY
0%
25%
EDIT
DEL
MAIN MENU
23
Advertisement
Table of Contents
