Connection; Hard Disk Installation - Avtech 36CH XVR Series User Manual

2. CONNECTION

2.1 Hard Disk Installation

Note: It's necessary to install a hard disk first before firmware upgrade to ensure the upgrade process
works properly.
Step1: Find the HDD tray and its accessories in the sales package, and place the rubber to the HDD tray as shown
below.
Step2: Get a compatible hard disk. With the PCB side facing down and the hard disk's connector facing the outside.
Then, place the hard disk in the HDD tray and insert the latches.
Step3: Remove the front cover by pulling from the left end of the cover as indicated below. You'll see eight HDD
bays.
Step4: Push the HDD tray with a hard disk installed to the end of the HDD bay to ensure the hard disk is inserted
properly.
Step5: Replace the front cover removed in Step3 back to the recorder.
3
CONNECTION