Avtech 36CH XVR Series User Manual page 49

8) SPOT MONITOR
Specify how VGA / composite port is used for video output: CALL MONITOR / EVENT MONITOR /
LIVE.
Note: For some models, only the VGA or composite port supports this function. The available output
options are depending on the model you have.
CALL MONITOR is used for sequence display. When this option is selected, go to CALL SCREEN

DURATION to select the duration time in second (03 / 05 / 10 / 15) and CALL MONITOR
PERMIT to choose the channel(s) you want for sequence display.
SPOT MONITOR
VGA RESOLUTION
SPOT DISPLAY
CALL SCREEN DURATION
CALL MONITOR PERMIT
EVENT MONITOR is used when any alarm event occurs. When this option is selected, go to

LAYOUT to select how many channels you want to see, and PRE-ALARM (SEC) and
POST-ALARM (SEC) to set how many seconds you'd like to see before (0 ~ 5) and after (3 ~ 10)
the event starts.
SPOT MONITOR
VGA RESOLUTION
SPOT DISPLAY
LAYOUT
PRE-ALARM (SEC)
POST-ALARM (SEC)
LIVE is used to select how many channels you'd like to show on the spot monitor. You can configure

up to 7 profiles for live display.
SPOT MONITOR
VGA RESOLUTION
SPOT DISPLAY
PROFILE
LAYOUT
SPOT MONITOR
SPOT MONITOR
SPOT MONITOR
CH1
CH5
VGA
1024 x 768
CALL MONITOR
5
4 selected
VGA
1024 x 768
EVENT MONITOR
4
3
5
VGA
1024 x 768
LIVE
1
4
CH3
CH8
MAIN MENU
44