Regular Report - Avtech 36CH XVR Series User Manual

6.5.3 REGULAR REPORT

This function is used to send event reports to the specified E-mail address. Users could configure up to 5
profiles to receive different reports about specific channels at different time.
Note: This function is available only when a hard disk is installed, and the recorder is connected to
Internet.
You can configure up to 7 profiles and use one of them as your backup preference.
SOURCE
PROFILE
ACTIVE
EXECUTION PERIOD
EXECUTION DAY OF WEEK
EXECUTION HOUR
CHANNEL √ ALL
CH1 CH2
CH5 CH6
CH9 CH10
CH13 CH14
Step1: In SOURCE, choose the profile you'd like to save all the settings configured in SOURCE.
Choose how often and when you'd like to receive reports. Finally, make sure this profile is active
(ACTIVE to ON).
EXECUTION PERIOD
EXECUTION DAY OF MONTH /
EXECUTION DAY OF WEEK
Step2: In CHANNEL, choose the channel(s) you want.
Step3: In DESTINATION, choose which event type(s) you want to see (MANUAL / MOTION / ALARM /
SYSTEM / TIMER / HUMAN DETECTION).
Step4: Click to manually add an Email address to receive reports or
list pre-defined in NETWORK  E-MAIL,
the selected Email address from the recipients list.
Step5: Click APPLY to confirm.
BACKUP
PROFILE1
ON
WEEKLY
MON
1
CH3 CH4

CH7 CH8
CH11 CH12
CH15 CH16
Select how often you want to receive reports: MONTHLY, WEEKLY or DAILY.
Depending on the option you selected in EXECUTION PERIOD:
 EXECUTION DAY OF MONTH shows when MONTHLY is selected.
Select one date from 1 ~ 31 to reboot.
 EXECUTION DAY OF WEEK shows when WEEKLY is selected. Select
one day from Monday ~ Sunday to reboot.
DESTINATION
EVENT TYPE
EDIT
tech_support@gmail.com
to select from the E-mail address
to modify the selected Email address, and
4 SELECTED
E-MAIL ADDRESS
APPLY
to remove
MAIN MENU
36