Stratasys Fortus K5 Series Site Preparation Manual page 4

REVISION LOG
Revision
821465-0001, Rev. A
821465-0002, Rev. A
821465-0003_REV_A
821465-0004_REV_A
821465-0005_REV_A
821465-0006_REV_A
821465-0007_REV_A
SAFETY
The following basic safety tips are given to ensure safe installation, operation, and maintenance of Stratasys
equipment and are not to be considered as comprehensive on matters of safety. Although the Fortus 380mc
and 450mc are designed to be safe and reliable printers, access to areas of the printer are potentially
dangerous.
SAFE ENVIRONMENT
• Connect equipment to a grounded facility power source. Do not defeat or bypass the ground lead.
• Know the location of equipment branch circuit interrupters or circuit breakers and how to turn them
on and off in case of emergency.
• Know the location of fire extinguishers and how to use them. Use only ABC type extinguishers on
electrical fires.
Know local procedures for first aid and emergency assistance at the customer facility.
•
• Use adequate lighting at the equipment.
• Maintain the recommended range of temperature and humidity in equipment area.
Do not use this product in an environment containing volatile or flammable compounds.
•
Date Description of Changes
August 2014 Initial release.
October 2014 Added 380mc information throughout.
August 2015 Added air quality information to the Environmental
Requirements section.
November 2015 Added ULTEM 1010 information throughout.
Updated document branding per new Stratasys design
and guidelines.
November 2015 Revised the information pertaining to moving the
printer.
January 2016 Revised the information pertaining to removing
shipping materials.
October 2016 Added Optional UPS information.
iv