Stratasys Fortus K5 Series Site Preparation Manual page 10

Figure 3: Transformer Dimensions & Mounting Specifications
(applicable to both transformers)
When configuring the transformer for different input voltages, the internal tap 1 connection wires (typically
colored yellow, red and orange) must be moved to the appropriate tap position (terminal block number) shown
on the connection diagram attached to the inside cover of the transformer. 3 phase input is connected to the
same terminal block positions as the tap 1 connection wires, per the connection diagram (see Figure 4 for an
example).
Figure 4: Internal Jumper Configuration
6