Remove Printer From Shipping Base - Ramp Instructions - Stratasys Fortus K5 Series Site Preparation Manual

REMOVE PRINTER FROM SHIPPING BASE - RAMP INSTRUCTIONS

Warning: Before removing the printer via the ramp, ensure that you have enough
manpower to remove the printer from the shipping base, as the printer is heavy (see
"Dimensions and Weights" on page
used to remove the printer from the shipping base.
1. Unlatch the two link locks securing the ramp in a vertical position
ramp onto a level surface (Figure 9).
Figure 8: Ramp Hardware (viewed from side)
2). A minimum of 3 capable adults should be
(Figure
11
8), and gently lower the
Ramp (in vertical
shipping position)
Link Lock
(1 per side)