Stratasys Fortus K5 Series Site Preparation Manual page 13

Warning: Shipping bands are very tight; when cutting shipping bands they may pop
open with force. Wear safety glasses when removing the shipping bands.
3. Carefully cut the shipping bands
4. Remove the cardboard cover from the top of the crate and then remove the foam restraining insert
(Figure 6).
5. Remove the 2 protective cardboard container panels
6. Carefully tear away all clear plastic wrapping.
7. Remove the printer from the shipping base, this can be done using a fork lift (see
from Shipping Base - Fork Lift Instructions" on page
"Remove Printer from Shipping Base - Ramp Instructions" on page
(Figure 5).
Figure 6: Unpacking the Printer (cover removed)
(Figure 6).
10) or manually via the use of a ramp (see
11).
9
Protective
Cardboard
Container
Panels (x2)
"Remove Printer