Wine Rack Trim - Perlick HP24 Series Installation Instructions Manual
Residential undercounter refrigeration
Hide thumbs
Also See for HP24 Series:
- Service manual (125 pages) ,
- Operation & installation manual (38 pages) ,
- Installation instructions manual (18 pages)
Table of Contents
Advertisement
PERLICK RESIDENTIAL INSTALLATION MANUAL
9. Verify that the gasket is fully seated onto the door
frame when completed.
10. After installation of the overlay panel is completed,
verify that the gasket is completely sealing around the
cabinet frame. If installing panels onto drawer models
(-6), repeat installation process for second drawer face.
Installation is now complete.
14 | perlick.com/residential
WINE RACK TRIM (OPTIONAL)
All wine reserve racks come with sleek stainless steel fronts.
Unfinished solid hardwood fronts are optional and can be
removed and replaced with other wood to match your
cabinetry. See Figure 18 and 19 for wine rack face details.
NOTE: The unfinished faces should be finished and sealed.
In many cases, stains and/or finishes have odors that
may be objectionable in an enclosed area. Do not stain
or finish wood faces while installed on unit. To remove
the front wood face from the wine shelf, simply pull out
the wine shelf and remove the fasteners, finish as desired,
and when completely dry, reinstall with fasteners.
Figure 18. Wine Rack Trim, 15" models
Figure 19. Wine Rack Trim, 24" models
Advertisement
Table of Contents
