Table of Contents
Advertisement
PERLICK RESIDENTIAL INSTALLATION MANUAL
WOOD OVERLAY INSTALLATION
(FOR -2, -4 AND -6 MODELS)
Before beginning installation, check all components for
proper fit and finish.
For
CAUTION
functionality, the overlay panels
should be 3/4" thick. The weight of the overlays should
not exceed 20 lbs for solid (-2) doors, 10 lbs for glass
(-4) doors, or 10 lbs for drawer (-6) models.
1. With the unit secured in position, open the door, remove
the door gasket and make sure panel pre-drilled holes
align with door frame holes.
2. Loosely attach four corners of overlay panel to the door
using #10 x 3/4" wood screws, installed through the
door frame from the rear.
3. Check for overall wood overlay panel fit, position, and
function. Make minor adjustments as necessary. When
panel is properly aligned, tighten mounting screws
securely. Install the rest of the mounting screws and
tighten securely.
Do not overtighten wood overlay
CAUTION
attachment screws, as this may
damage the factory supplied door frame.
12
perlick.com
best
performance
WINE RACK TRIM (OPTIONAL)
All wine reserve racks come with sleek stainless steel fronts.
Unfinished solid hardwood fronts are optional and can be
removed and replaced with other wood to match your
cabinetry. See Figure 18 and 19 for wine rack face details.
and
NOTE: The unfinished faces should be finished and sealed.
In many cases, stains and/or finishes have odors that
may be objectionable in an enclosed area. Do not stain
or finish wood faces while installed on unit. To remove
the front wood face from the wine shelf, simply pull out
the wine shelf and remove the fasteners, finish as desired,
and when completely dry, reinstall with fasteners.
Figure 18. Wine Rack Trim, 15" models
Figure 19. Wine Rack Trim, 24" models
Advertisement
Table of Contents
