Connecting External Devices; Cable Connecting; Disconnecting Cables - Fujitsu CELSIUS W4 Series Operating Manual

Getting started

Connecting external devices

Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!
Connect and disconnect the cables in the order described below.

Cable connecting

► Switch off all affected devices.
Cord Cable
► Remove power plugs from the mains outlets for all devices.
► Plug all cables into the device and peripherals. Please make sure that you always
observe the safety notes provided in
► Plug all data communication cables into the sockets provided for the data
/ telecommunication networks.
► Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in
ports", Page 18

Disconnecting cables

► Switch off all affected devices.
Cable
► Remove power plugs from the mains outlets for all devices.
► Unplug all data communication cables from the utility sockets.
► Unplug all cables from the device and peripherals.
14
"Important notes", Page
and in the documentation for the USB devices.
9.
"Connecting external devices to the USB
Fujitsu Technology Solutions