Section 2 Hardware Installation; Installing The Memory Module - AXIOMTEK IPC950 User Manual

The IPC950 products are convenient for your various hardware configurations, such as the
memory module, HDD (Hard Disk Drive) and PCIe card. Chapter 2 will show you how to install
these hardware parts.
Procedure of Installation:
Step 1 Turn off the system.
Step 2 Disconnect the power connector.
Loosen seven screws and follow the direction of "
Step 3
from the chassis.
2.1

Installing the Memory Module

Step 1 Loosen four screws and remove the bracket.
Hardware Installation
HARDWARE INSTALLATION
" to remove the back cover
IPC950 user's Manual
SECTION 2
37