Floor Assembly - KidKraft COZY ESCAPE PLAYHOUSE F29045 Installation And Operating Instructions Manual

Step 4: Floor Assembly
Part 1
A: Place 1 (9463) Floor Board tight to one End Wall and 1 (9518) Floor Board B tight the the opposite End Wall.
Attach each board to the (9462) Side Joists using 4 (S20) #8 x 1-3/8" Wood Screws per board. (fig. 4.1 & 4.2 )
B: Place (9464) Floor Support A tight to the bottom of each Floor Board, centred over the pilot holes on the End
Walls, then attach with 2 (S4) #8 x 3" Wood Screws per side. Attach (9463) Floor Board and (9518) Floor Board B
to (9464) Floor Support A with 2 (S20) #8 x 1-3/8" Wood Screws per board. (fig. 4.1, 4.3 , 4.4)
Fig. 4.1
9462
Wood Parts
1 x Floor Support A 1-1/4 x 3 x 62-13/64"
9464
1 x Floor Board 5/8 x 3-3/8 x 34-3/8"
9463
1 x Floor Board B 5/8 x 5-1/4 x 35"
9518
Fig. 4.2
S20
9463
9463
9464
Fig. 4.4
4 x
12 x
x 6
Fig. 4.3
S4
x 4
9518
Hardware
#8 x 3" Wood Screw
S4
#8 x 1-3/8" Wood Screw
S20
21
9464
9463