Table of Contents
Advertisement
Package Contents
Package Contents
Your PWM 180-Pin Probing Board package contains the following items:
• PWM 180-Pin Probing Board
• Hardware for securing the extender board onto the EK-KIT Lite
Contact the vendor where you purchased your EZ-KIT Lite or contact
Analog Devices, Inc. if any item is missing.
PWM 180-Pin Probing Board Installation
Follow these instructions to ensure correct operation of the product
hardware.
1. Attach the extender board to the EZ-KIT Lite.
The
P1
corresponding 180-pin connector on the EZ-KIT Lite.
2. Use the provided hardware to secure the extender to the EZ-KIT
Lite.
1-2
connector on the extender board can be connected to the
PWM 180-Pin Probing Board Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the EZ-Extender PWM 180-Pin and is the answer not in the manual?
Questions and answers