Crosscore Embedded Studio Setup - Analog Devices ADSP-SC573 EZ-KIT Manual

CrossCore Embedded Studio Setup

LED22
SW2
P22
P27
J10
J12
J1
J14
Figure 2-1: Default Hardware Setup
CrossCore Embedded Studio Setup
For information about the CrossCore Embedded Studio
http://www.analog.com/en/design-center/processors-and-dsp/evaluation-and-development-software/adswt-cces.html
Follow these instructions to ensure correct operation of the product software and hardware.
1. Connect the EZ-KIT board to a personal computer (PC) running CrossCore Embedded Studio
emulator:
a. Plug one side of the USB cable into the USB connector of the emulator. Plug the other side into a USB
port of the PC running CrossCore Embedded Studio
b. Attach the emulator to the header connector,
2. Attach the provided cord and appropriate plug to the 12V power adapter:
a. Plug the jack-end of the power adapter into the power connector
b. Plug the other side of the power adapter into a power outlet. The power LED (
power is applied to the board.
It is assumed that the CrossCore Embedded Studio
NOTE: If you connect the board or emulator first (before installing CCES) to the PC, the Windows driver wizard
may not find the board drivers.
2–4
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
P16 P15 P14 P13 P12
P11
JP4
LED8
SW4
SW3
SW9
J11
J3
®
software is installed and running on your PC.
P23 P7
P10
SW1
J13
P1
P24
P5
J15
SW7
J19
J16
SW6
SW8
J17
J5 J6
JP3
Connectors with dotted outline are on the bottom of the board
®
product and software download, go to:
®
.
or , on the EZ-KIT board.
P1 P5
P22
J7 J8
LED3
LED1
LED2
J2
J9
J8
SW5
P2
P25
®
, using an
on the EZ-KIT board.
) is lit green when
LED9
ADSP-SC573 EZ-KIT
LED26
J4
LED25
LED24
LED23
P1C
P1B
P3
P1A
®
Manual