Upload Program - ADEEPT Hexapod 6 Legs Spider Robot Manual

www.adeept.com

Upload Program

After the preparations above, next we will upload the program (example sketches provided) to
the Arduino Nano and Adeept UNO R3 boards. The Robots kit comprises of two parts: the remote
control based on Arduino Nano and the Robots controller on Adeept UNO R3.
First, upload the sketch to Arduino Nano. Open the file for the remote control,
AdeeptRemoteControl.ino.
Connect the Arduino Nano to the computer. Select Tool -> Board: "Arduino Nano"-> Arduino
Nano, and Port ->COM10. COMx is the port number assigned to the Arduino Nano and can be
COM1, COM2, COM3...So it depends.
72