Table of Contents
Advertisement
oPerAtIng the DevIce
Smooth function
The switchable "Smooth" function ensures a rounded, detailed sound, even at low
volumes .
►
Press the SMOOTH button (7) to enable the Smooth function .
The Smooth function is activated and the LED (2) is lit .
►
Press the SMOOTH button (7) again to turn off the Smooth function .
The Smooth function is deactivated and the LED (2) goes out .
note:
The SUBT button (30) on the remote control can also be used to switch the Smooth
function on and off .
Subsonic filter (optional)
To get a higher volume level from small loudspeakers, we recommend the use of our
specially tuned subsonic filter . When activated the frequencies below approx . 45 Hz are
attenuated, resulting in an increased loudspeaker power handling . The subsonic filter
can be activated or deactivated while the 101 is running .
To turn the subsonic filter on and off:
►
Use the little toggle switch (31) on the right side wall in the upper venting slot .
Moving the toggle switch towards the rear panel means that the subsonic filter is
turned on .
Moving the toggle switch towards the front panel means that the subsonic filter is
turned off .
note:
The subsonic filter is available as an option and not included in the standard delivery
contents . If you have any questions, please contact your authorised specialist dealer .
The subsonic filter must be installed or changed only by an expert technician .
20
31
Advertisement
Table of Contents
