Table of Contents
Advertisement
Important Safety Information
Please read through the device operating instructions completely and save them .
Should you have any questions, please contact your specialist dealer .
Unpacking
An operating temperature that is too low or too high may lead to errors in the device .
For this reason, after unpacking the device, leave it standing for some time before
connecting it and turning it on .
The device is delivered packaged in a plastic bag . Keep this bag out of reach of
children to prevent a choking hazard .
Set-up
When selecting an installation location, please note the following:
• Avoid direct sunlight .
• Avoid excessive heat, cold, humidity, and dust .
• Ensure sufficient ventilation . Do not place the device in a closed rack .
• Slots and openings on the device serve as a means of ventilation . They must not be
covered .
• Do not expose the device to dripping water or spray water and do not place any
containers holding liquids on your device .
• Do not place any open ignition sources, such as burning candles, on the device .
Connecting
Use only the supplied 3-wire power cord for power supply . The protective earth contact
must not be rendered ineffective . Connect the device only to an outlet with a
functioning protective conductor connection .
Connectors
Do not touch the pins in the connectors on the back side of the device with your
fingers . Static discharges may damage the electronics inside the device .
Connection cables
Burmester produces symmetric and asymmetric connection cables, as well as speaker
cables in all lengths to transmit the best possible sound quality . The impedance of our
cables is adapted for all BURMESTER components .
For optimal power supply, we recommend our triple shielded BURMESTER POWER
power cord .
101 Integrated Amplifier
ImPortAnt sAfety InformAtIon
7
Advertisement
Table of Contents
