Connecting The Speaker Outputs - Burmester Classic 101 Manual

Headphone output (4)
High-intensity sound
Loud output signals may damage your hearing .
►
Please note that the volume is controlled by the connected device when the
Surround Thruput is activated . .
►
Do not increase the volume before putting on the headphones; increase to the
desired volume once you have put them on .
note:
Do not insert the headphone plug into the headphone socket until after you have
switched the device on with the power on/off switch, the remote control, or one of the
BURLINK commands, and unplug the headphone jack from the socket before switching
off the device .

Connecting the speaker outputs

 You have read the information on the speaker outputs on page 14 .
The device is switched off .
The left output on the integrated amplifier is connected to the left speaker and the
right output on the integrated amplifier is connected to the right speaker .
►
Connect a speaker cable to the right speaker and then connect the cable to the
RIGHT POS (10) and RIGHT NEG (11) connectors . Pay attention to the correct
polarity . With the 101, the positive connection is marked red and the negative
connection is marked black .
►
Connect a speaker cable to the left speaker and then connect the cable to the
LEFT POS (13) and LEFT NEG (12) connectors . Pay attention to the correct polarity .
With the 101, the positive connection is marked red and the negative connection is
marked black .
101 Integrated Amplifier
connectIng the DevIce
CAUTION
15