13.2
Diagnostics
Diagnostics allow you to find the root cause of a an issue or a breakdown that may
occur during the life of your Mailing System.
The system performs tests automatically to diagnose the problem and generate
corresponding reports.
The System Data gives data about the status of the system and the events or errors
that have occurred.
Diagnostics
As Supervisor, you can gain access to all the diagnostic data listed below:
No.
Diagnostic
1
Ping Server
2
Sensors Status
3
Advanced Feeder
4
Display
5
Keypad
6
USB ports
7
Serial Connectors
8
Ping Tool
9
IP Configuration Checker
10
IP Configuration
Comments
Sends a message to a server (if connected) to check
the line.
Reports the status ([0] or [1]) of the sensors below:
• Top doc
• Start print
• Cover
• Carriage
• Top Seal
Feeder main motor test
The screen displays, successively, a black bar
without text, then a text.
Displays "Key ok" if the test is correct
Checks the two USB ports (need USB keys).
Checks the serial port.
Checks LAN address.
Checks LAN connection.
Displays current parameters related to IP
Configuration
13
309
Need help?
Do you have a question about the iX-5 and is the answer not in the manual?