How To Fill The Sealer Bottle - quadient iX-5 User Manual

8. Push down on the upper drive assembly until it locks back into position.

How to Fill the Sealer Bottle

The Automatic Feeder uses water for sealing envelopes.
If the system is out of water, the mailing process continues but the envelopes will not
sealed properly.
To add water (or sealing solution) to the bottle:
1. Remove the bottle from its base and turn it over.
12
2. Unscrew the cap and fill the bottle with water up to the limit marks.
3. Screw the cap back and put the bottle back into place.
290