Chapter 3: System Setup
C
3: s
haPter
ystem
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit's power
CAUTION!
CAUTION!
CAUTION!
is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the bottom, front and rear sides are used to secure the
cover to the chassis. Remove these screws and put them in a safe place
for later use.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
Bottom
19
Front
Rear
NDiS V1000 User Manual