Nexcom NDiS V1000 User Manual page 50

Chapter 4: BIOS Setup
Digital I/O Configuration
This section is used to configure the digital input and output signals.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Digital I/O Configuration
Digital I/O Pin (SIO_IN0) [Input]
Digital I/O Pin (SIO_IN1) [Input]
Digital I/O Pin (SIO_IN2) [Input]
Digital I/O Pin (SIO_IN3) [Input]
Digital I/O Pin (SIO_OUT0) [Output High]
Digital I/O Pin (SIO_OUT1) [Output High]
[Output High]
Digital I/O Pin (SIO_OUT2)
Digital I/O Pin (SIO_OUT3) [Output High]
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Digital I/O (SIO_IN0) to Digital I/O (SIO_OUT3)
Configures digital I/O pin 1 to pin 8 as input, output high or output low.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Hardware Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Configure Digital I/O Pin 1.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Smart Fan Function
Enables or disables the smart fan function.
System temperature1 and System temperature2
Detects and displays the current temperature of the system.
CPU temperature
Detects and displays the current CPU temperature.
36
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Pc Health Status
System temperature1 : +59ºC
System temperature2 : +58ºC
CPU temperature : +58ºC
CPU (TSI) temperature : +70ºC
CPUFAN Speed : N/A
SYSFAN Speed : N/A
VCORE : +1.088 V
VDDR : +1.208 V
+5V : +5.167 V
+12V : +12.471 V
VCC3V : +3.392 V
+3VSB : +3.280 V
VSB5V : +4.992 V
VBAT : +3.136 V
Smart Fan Function [Disabled]
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Enable or Disable Smart Fan
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS V1000 User Manual