Chapter 3: System Setup; Removing The Top Cover From The Chassis - Nexcom AIEdge-X 300 User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Top Cover from the Chassis

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION!
is off and disconnected from the power sources to prevent
electric shock or system damage.
1. Remove the three mounting screws around the chassis then lift up the top
cover to remove it.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
28
AIEdge-X ® 300 User Manual