Nexcom NDiS V1000 User Manual page 47

Chapter 4: BIOS Setup
ACPI Settings
This section is used to configure ACPI settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main
Advanced Chipset PCIPnP
ACPI Settings
Enable ACPI Auto Configuration [Disabled]
Enable Hibernation [Enabled]
ACPI Sleep State [S3 (Suspend to RAM)]
Lock Legacy Resources [Disabled]
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Enable ACPI Auto Configuration
Enables or Disables BIOS ACPI Auto Configuration.
Enable Hibernation
Enables or disables system ability to hibernate (OS/S4 Sleep State). This
option may not be effective with some operating systems.
ACPI Sleep State
Select the highest ACPI sleep state the system will enter when the suspend
button is pressed. The options are Suspend Disabled and S3 (Suspend to RAM).
Lock Legacy Resources
Enables or disables lock of legacy resources
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Exit
Security
Enables or Disables BIOS ACPI
Auto Configuration.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
SATA Configuration
This section displays information on the connected SATA devices.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Boot
SATA Configuration
SATA Port 1 (M.2 M-KEY)
SATA Port 2
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
SATA Port 1 (M.2 M-KEY) and SATA Port 2
Displays what type of device is connected to SATA port 1 and port 2.
33
Security Save & Exit
M.2 (S42) 3TE7 (60.0GB)
Not Present
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS V1000 User Manual