Advanced - Nexcom NDiS V1000 User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security
Trusted Computing
ACPI Settings
SATA Configuration
F81866 Super IO Configuration
Hardware Monitor
S5 RTC Wake Settings
Serial Port Console Redirection
CPU Configuration
USB Configuration
CSM Configuration
NVMe Configuration
Network Stack Configuration
AMD CBS
AMD PBS
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Trusted Computing Settings
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
TPM20 Device Found
Firmware Version:
Vendor:
Security Device Support
Active PCR banks
Available PCR banks
SHA-1 PCR Bank
SHA256 PCR Bank
Pending operation
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
SHA-1 PCR Bank
Enables or disables SHA-1 PCR Bank.
SHA256 PCR Bank
Enables or disables SHA256 PCR Bank.
Pending operation
Schedules an operation for the security device.
32
Enables or Disables BIOS
support for security device.
5.62
O.S. will not show Security
IFX
Device. TCG EFI protocol and
INT1A interface will not be
[Enable]
available.
SHA-1,SHA256
SHA-1,SHA256
[Enabled]
[Enabled]
[None]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS V1000 User Manual