Chapter 3: System Setup
C
3: s
haPter
ystem
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit's power
CAUTION!
CAUTION!
CAUTION!
is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the front, rear and bottom are used to secure the cover
to the chassis. Remove these screws and put them in a safe place for
later use.
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
32
NDiS B560-Q User Manual