Nexcom NDiS V1000 User Manual page 51

Chapter 4: BIOS Setup
CPU (TSI) temperature
Detects and displays the current CPU temperature from TSI.
CPUFAN Speed
Detects and displays the current CPU fan speed.
SYSFAN Speed
Detects and displays the current system fan speed.
VCORE to VBAT
Detects and displays the output voltages.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
S5 RTC Wake Settings
This section is used to configure the system to wake from S5 using RTC alarm.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main
Advanced Chipset
Wake system from S5
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Wake system from S5
Enables or disables system wake on alarm event. When FixedTime is selected,
system will wake on the hr::min::sec specified. When DynamicTime is
selected, system will wake on the current time + Increase minute(s).
37
Exit
PCIPnP Security
[Disabled] Enable or disable System wake
on alarm event. Select
FixedTime, system will wake on
the hr::min::sec specified.
Select DynamicTime , System
will wake on the current time
+ Increase minute(s)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS V1000 User Manual