Nexcom NDiS V1000 User Manual page 49

Chapter 4: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Change Settings [Auto]
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Watch Dog Configuration
This section is used to configure the watchdog timer.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Watch Dog Timer
Enables or disables the watchdog timer function.
35
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced
Watch Dog Parameters
Watch Dog Timer [Disabled]
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Enabled or Disabled Watch Dog
Timer function
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS V1000 User Manual