Nexcom NDiS V1000 User Manual page 62

Chapter 4: BIOS Setup
Platform Misc Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
Platform Misc Configuration
Display Device Select [Auto]
PCIe x8 Slot [Enabled]
ASPM Mode Control [Disabled]
PCIe LAN1 Controller [Enabled]
ASPM Mode Control [Disabled]
LAN1 PXE OpROM [Disabled]
PCIe LAN2 Controller [Enabled]
ASPM Mode Control [Disabled]
LAN2 PXE OpROM [Disabled]
PCIe M.2 M-key Slot [Enabled]
ASPM Mode Control [Disabled]
PCIe M.2 M-key Slot [Enabled]
ASPM Mode Control [Disabled]
PCIE Wake [Disabled]
Version 2.20.1273. Copyright (C) 2019 American Megatrends, Inc.
Display Device Select
Select the display device that will be activated during POST.
PCIe x8 Slot
Enables or disables the PCIe x8 slot.
ASPM Mode Control
Configures the active-state power management (ASPM) mode.
PCIe LAN1 Controller and PCIe LAN2 Controller
Enables or disables LAN1 and LAN2 controller.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
LAN1 PXE OpROM and LAN2 PXE OpROM
Enables or disables boot option for LAN1 and LAN2 controller.
PCIe M.2 M-key Slot
Enables or disables the M.2 M-key slot.
Select the Display Device
which will be activated during
POST.
PCIE Wake
Enables or disables PCIe to wake the system from S5.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
48
NDiS V1000 User Manual