Toshiba TS3000 Series Instruction Manual page 15

series Robot Controller
[06] Port number of destination
[E06] Port number of destination
{ IP0 }
= 1000
{ IP1 }
= 1001
{ IP2 }
= 1002
{ IP3 }
= 1003
This parameter specifies each port number that is used by the destination. This is
used in client mode only. This must match the port number used by the server at the
destination.
{IP0}
=(Port number of destination)
{IP1}
=(Port number of destination)
{IP2}
=(Port number of destination)
{IP3}
=(Port number of destination)
[E07] IP address of destination
[E07] IP address of destination
{IP0}
= 192.168.0.150
{IP1}
= 192.168.0.151
{IP2}
= 192.168.0.152
{IP3}
= 192.168.0.153
COMMUNICATION MANUAL
– 11 –
STE 80732