Equipment Frame - Husqvarna Rider PR 17 Workshop Manual

3. Fit the centre belt in position on the
centre pulley.
4. Reset the cutting unit in the mowing
position.

Equipment Frame

Removal
1. Remove the cutting unit, see "Removing
the Cutting Unit" on page 83.
2. Push down the equipment frame and
drop the catch.
3. Check the measurement of the adjuster
screws' position. Note the values and
use these as initial values when
assembling.
4. Unscrew the adjuster screws completely
so that the springs release.
REPAIR INSTRUCTIONS
Centre gear
Equipment frame in uppermost position
Control measurement
79
English-