Battery; Arm Supports - Husqvarna Rider PR 17 Workshop Manual

DELIVERY AND DEALER SERVICE

Battery

!
WARNING!
Actions with acid contact
External:
Rinse thoroughly with water.
Internal:
Drink large quantities of water or
milk. Contact a doctor as soon as
possible.
Eyes:
Rinse thoroughly with water. Con-
tact a doctor as soon as possible.
The battery emits explosive gases.
Sparks, flames, and cigarettes
must not be present in the vicinity
of the battery.
The battery is delivered dry charged from the
factory. The cells are fitted with seals. The
battery plugs are packed in a plastic bag.
• Slowly fill the battery cells with battery
acid to the max. level mark on the
battery container.
• Wait 20 minutes and then top up with
battery acid as needed.
• Charge the battery with 12 V, max. 6 A,
for four (4) hours.
• Check the electrolyte level and top up if
necessary with distilled water to the upper
level marks on the battery container.
Fit the battery.
Connect the battery with the nuts and bolts
that are attached to the battery. Counter the
bolts when fitting so that the electrodes are
not strained.
• The black cable connects to -.
• The red cable connects to +.
Ensure that the cables do not chafe against
anything.
Fit the cover on the battery and tighten the
strap.

Arm Supports

In those cases where arm supports are
delivered with the machine, it is the dealer's
responsibility to fit them.
22
English-
Hazardous! Corrosive! Poisonous!
Level marking, battery
Connecting the battery