Replacing The Hydrostatic Transmission Cable - Husqvarna Rider PR 17 Workshop Manual

Replacing the Hydrostatic Transmission Cable

Removing the Hydrostatic Transmission Cable
1. Remove the frame plate by loosening the
screws (two on the power steering
housing).
2. Loosen the hydrostatic transmission
cable's forward lock nut a 1/4 turn and
remove the locking spring.
3. Remove the hydrostatic transmission
cable's forward clamp, which is attached
inside the centre bracket.
4. Remove the transmission cover.
REPAIR INSTRUCTIONS
Frame plate
Front locking nut and locking spring
Front clamp
Transmission cover
61
English-