Equipment Frame - Husqvarna FR 2216 MA 4x4 Workshop Manual

Equipment frame

Removal
1. Remove the cutting unit, see "Removing
the Cutting Unit".
2. Unscrew the adjust nuts completely so
that the springs release.
3. Remove the split pin and release the link
for the height adjustment from the
triangular link.
4. Lower the equipment frame with the
mechanical lever. Insert a small
screwdriver or the like through the chain,
so that it can not slide into the frame
tunnel, and release the chain from the
equipment frame.
5. Remove the equipment frame's rear
guide screws.
REPAIR INSTRUCTIONS
Adjuster nuts
Link height setting
Chain bracket
Rear guide screw
83
English-