Equipment Frame - Husqvarna Rider 13 AWD Workshop Manual

Equipment frame

Removal
1. Remove the cutting unit, see "Removing
the Cutting Unit".
2. Unscrew the adjust nuts completely so
that the springs release.
3. Remove the split pin and release the link
for the height adjustment from the
triangular link.
4. Lower the equipment frame with the
mechanical lever. Insert a small
screwdriver or the like through the chain,
so that it can not slide into the frame
tunnel, and release the chain from the
equipment frame.
5. Remove the equipment frame's rear
guide screws.
102
English-
REPAIR INSTRUCTIONS
Adjuster nuts
Link height setting
Chain bracket
Rear guide screw
8009-845
8009-844
8009-701
8009-846