Cutting Unit; Serial Number - Husqvarna Rider PR 17 Workshop Manual

Cutting unit

PR 17 and PR 17 AWD can be equipped with
three different cutting units. CombiTurf 94,
CombiTurf 103 and CombiTurf 112
PF 21 and PF 21 AWD can be equipped with
two different cutting units. CombiTurf 112 and
CombiTurf 122
The Combi-unit, equipped with a BioClip-
plug, finely chops the cuttings to fertiliser.
Without the BioClip-plug the unit works in the
same way as a rear ejection unit. The rear
ejector ejects the clippings behind the unit
without finely chopping them.

Serial Number

The machine's serial number is indicated on
a plate attached to the front side under the
seat. Stated on the plate, from the top, are:
• The machine's type designation.
• The manufacturer's type number.
• The machine's serial number.
Please state the type designation and serial
number when ordering spare parts.
The engine's serial number is found on a
barcode sticker. This is placed on the left side
of the crankcase, in front of the starter. The
sticker states:
• The engine's serial number (E/NO).
• Code.
Please state these when ordering spare
parts.
The transmission's serial number is found on
the barcode sticker located on the front of the
housing on the left-hand drive shaft:
• The type designation is stated above the
barcode and starts with the letter K.
• The serial number is stated above the
barcode and has the prefix s/n.
• The manufacturer's type number is
stated under the barcode and has the
prefix p/n.
Please state the type designation and serial
number when ordering spare parts.
28
English-
DESIGN AND FUNCTION
The machine's serial number
The engine's serial number
The transmission's serial number