VAT 612 Series Installation, Operating, & Maintenance Instructions page 77

1. Remove panel screws
2. Remove female screw locks from SENSOR and
POWER connectors
3. Loosen and remove the LOGIC connector screw
4. Disconnect fan cable from motor driver board
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Installation, Operating & Maintenance Instructions
Series 612 DN 63-250 (I.D. 2.5" - 10"), CC-Link
Description Required tool
Pozidriv screw driver
size 1
Open end wrench 4.5mm
Open end wrench 10mm
289856EA
77/85
2011-07-06