VAT 612 Series Installation, Operating, & Maintenance Instructions page 74
Butterfly pressure control valve with cc-link interface, dn 63-250 (i.d. 2.5" - 10")
Hide thumbs
Also See for 612 Series:
Table of Contents
Advertisement
18. Place the plate on shaft and fasten
the screws a little.
19. Center plate with feeler gauge as
shown
Size
63
80
100
160
200
250
20. Tighten plate screws with 2 Nm.
21. Assemble control and actuating unit
to valve unit. Tighten mounting
screws adequately.
22. Tighten clamp coupling with 1.1 Nm.
23. Reinstall valve into vacuum system
according to chapter «Installation».
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Installation, Operating & Maintenance Instructions
Series 612 DN 63-250 (I.D. 2.5" - 10"), CC-Link
Description
Feeler gauge mm
0.04
0.06
0.06
0.06
0.08
0.1
Required tool
Allen Wrench
3mm
Adequate
feeler gauge
Allen Wrench
3mm
Allen Wrench
2mm
289856EA
74/85
2011-07-06
Advertisement
Table of Contents
