Update Your Instrument Firmware - Owon TAO3000 Series User Manual

7) ADCB
Parameter
name
ADCB
8) CHAN
Parameter
name
CHAN
9) VOL2
Parameter
name
VOL2
2.Data
The data type is signed integer. You can determine the data type (char, short int or int)
based on the BYTE parameter. The valid range is determined by the ADCB parameter,
e.g. the valid range for 8-bit ADC is -127 to +127.

Update your Instrument Firmware

Use the side panel USB port to update your instrument firmware using a USB
memory device.
USB memory device requirements: Insert a USB memory device into the
USB port on the side panel. If the icon
screen, the USB memory device is installed successfully. If the USB memory
device cannot be detected, format the USB memory device according to the
methods in "USB disk Requirements" on P59.
Caution: Updating your instrument firmware is a sensitive operation, to
prevent damage to the instrument, do not power off the instrument or remove
the USB memory device during the update process.
To update your instrument firmware, do the following:
4.Advanced User Guidebook
Meaning
ADC bit, ADC
resolution
Meaning
Number of
channels
Meaning
Voltage division,
divided by 400 is
ADC resolution.
(When the source
mode is
Out1&Out2, it is
the second
channel voltage
division.)
70
Value Comment
4 bytes int 8-bit or 12-bit
Value Comment
4 bytes int 1 or 2
Value Comment
4 bytes float The value indicates
voltage (the unit is mV),
such as 200 mV.
appears on the top right of the