Owon TAO3000 Series User Manual page 74

a
b
ab
x
Line
Save the waveform between two cursors onto a USB memory
device. Insert a USB memory device into the port on the side
panel. If the icon
USB memory device is installed successfully. If the USB memory
Save device cannot be recognized, format the USB memory device
according to the methods in "USB disk Requirements" on P59.
The name is default as current system date and time. The cloned
waveform will be saved onto the USB memory device as an OTA
file.
To save the CH1 waveform and save to the USB memory:
(1) Click to call up the menu panel. Click the Save softkey on panel.
(2) Select Type in the bottom menu, select Clone in the left menu.
(3) Select Source in the bottom menu, select Mode as Out1 in the right menu.
(4) Select AG Output Out1 as CH1 in the right menu.
(5) Select Line in the bottom menu. If a or b is selected, swipe to move the
cursor. If ab is selected, swipe to move the pair of cursors. If x is selected,
the entire screen will be selected automatically.
(6) Select Save in the bottom menu. An input keyboard used to edit the file
name will pop up. Select the keys to input the file name, select the
key in the keyboard to confirm. The cloned waveform will be saved onto
4.Advanced User Guidebook
Click line a to select it, swipe left/right to move it.
Click line b to select it, swipe left/right to move it.
Two cursors are linked. Click line a or b to select
them, swipe left/right to move the pair of cursors.
Set the cursors to select the entire screen
automatically.
The waveform information is displayed at the left
bottom corner of the screen.
Note: If "Out Of Limits" appears in the information or a
message "Waveform points beyond the limit." appears
on the screen, that means the length of the cloned
waveform exceeds the limit. When the source mode is
Out1 or Out2, the maximum length is 2M; When the
source mode is Out1&Out2, the maximum length is 1M.
Click to call up the menu panel. Click the Acquire
softkey on panel, select Length in the bottom menu, and
set the record length to a smaller value.
appears on the top right of the screen, the
68
Time
Frequency
Length