Owon TAO3000 Series User Manual page 64

4. Select Storage in the bottom menu, select Internal in the right menu.
5. Select Source in the bottom menu, check CH1, CH2, Math in the right
menu for Source.
6. Select Object & Show in the bottom menu, select Wave1 as object
address in the left menu.
7. Select Save in the bottom menu to save the waveform.
8. Recalling: Select Object & Show in the bottom menu, select Wave1 in
the left menu. In the right menu, select Show as ON, the waveform stored
in the address will be shown, the address number and relevant information
will be displayed at the top left of the screen.
In order to save the waveform of CH1 and CH2 into the USB storage as a BIN
file, the operation steps should be followed:
1. Turn on CH1 and CH2 channels.
2. Click to call up the menu panel. Click the Save softkey on panel.
3. Saving: Select Type in the bottom menu, select Wave in the left menu.
4. Select Storage in the bottom menu, select External in the right menu.
5. Select Type in the bottom menu, select BIN in the right menu as the
storage format.
6. Select Source in the bottom menu, check CH1, CH2 in the right menu for
Source.
7. Select Save in the bottom menu, an input keyboard used to edit the file
name will pop up. The default name is current system date and time.
Select the
8. Recalling: The BIN waveform file could be open by OWON waveform
analysis software (on the supplied CD).
Tip:
Whatever the Type of save menu is set, you can save the waveform by just
pressing the Copy panel button in any user interface. If the Storage of the
save menu is set as "External", you should install the USB disk. Please refer
to the contents below to install the USB disk and name the file to be saved.
Save the current screen image:
The screen image can only be stored in USB disk, so you should connect a
USB disk with the instrument.
1. Install the USB disk: Insert the USB disk into the "USB Host port" of
4.Advanced User Guidebook
key in the keyboard to confirm.
58