Owon TAO3000 Series User Manual page 45

UART Trigger menu list:
Menu Setting
Bus Type
Source
Input
Polarity
When
Chk Error
Configure
4.Advanced User Guidebook
UART Trigger
Instruction
Set vertical channel bus type as UART
UART
trigger.
CH1 Select CH1 as the trigger source.
CH2 Select CH2 as the trigger source.
CH3 Select CH3 as the trigger source.
CH4 Select CH4 as the trigger source.
Normal Select polarity of data transmission as
Normal.
Inverted Select polarity of data transmission as
Inverted.
Trigger on the start frame of position. After
Start choosing this condition, press Configure to
enter detailed settings.
Trigger when error frame is detected. After
Error choosing this condition, press Configure to
enter detailed settings.
Trigger when Chk Error is detected. After
choosing this condition, press Configure to
enter detailed settings.
Trigger on the last bit of the preset data.
Data After
Configure to enter detailed settings.
Common Baud: click in the left menu to
choose common baud.
Start
Custom Baud: click
baud, ranges from 50 to 10,000,000.
Stop Bit：Select "1" or "2".
Parity: Select None, Odd, or Even
Common Baud: click in the left menu to
Error
choose common baud.
Custom Baud: click
baud, ranges from 50 to 10,000,000.
choosing this
39
condition, press
or choose
or to choose