Table of Contents
Advertisement
DT9000
Removing the front
cover
20171205-V2
4.3. Mounting as a wall-instrument
In order to remove the front cover, first remove the four
fixing screws as shown in the drawing. A screwdriver of
appropriate head-size only should be used. Using
screwdrivers with inappropriate head-size may cause a
damage in the screws' heads or in the instrument front
panel.
Remove the screws by turning them in anticlockwise
direction as shown in the drawing Step (1). The screws are
secured against falling out. After this you can simply take
away the front cover from the housing (2) and you can
open it by turning it downwards (3). Plastic ties are used to
fasten the front cover to the housing, preventing it from
falling.
11
Advertisement
Table of Contents
