Mounting position
Preparatory steps
Dimensions of panel
cutout
8
4. Mounting
4.1. General instructions
Select a mounting position you can easily read the display reach for
mounting and connecting the instrument and that minimizes the
hazard of water, dust or dump getting into the instrument.
4.2. Main dimensions of the instrument
4.3. Mounting
The instrument is housed in a DIN standard ABS case. Fix it in the
panel with the enclosed mounting clamps.
1. Cut-out the panel according to the figure shows above.
The cut-out needs special tools, it must be carried out by trained
specialist personnel.
DT4227 UI (PS)
20200205-V0