Table of Contents
Advertisement
DT9000
Sequence of operations 9. If the codes written in for the first and second time are
Returning into the menu
item Changing the user
code
Exit from the menu
20171205-V2
identical with each other, the device exits from the menu
item. You see this
Do not forget the user code you have specified. If you
forget it, defining another one is possible only by using a
supervisor code for entering into the menu.
1. As you have already left the menu item Changing the
user code, you see this:
(2. If you want to change the setting you have performed
just now, or if you just want to check what you have typed
in, continue the operation from Point 3 of the Sequence
of operations.)
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the ▲ button to
select the desired menu items.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
on the display.
.
(Exit) are shown on the
53
Advertisement
Table of Contents
